Started installing the main body loom what seems like a lifetime ago now but only really fitted the rear section and didnt get around to finishing off the terminations.
So time to set about making some progress here...
First things first the connections to the rear lights were terminated
It wasn't clear how the wiring for the reverse and fog lights was meant to work out so we did some testing and established that there is a common earth. The outer casing of the loom was slit open and the relevant live feeds were pulled through in the correct positions rather than having to have them run back and forth inside the boot. The earth wires were also put in place and the whole loom was then taped back up.
These terminations will be covered in shrink-wrap once the car is built but until the whole system is tested I don't want to do this.
No comments:
Post a Comment